Compare


One of these rings contains an earth mined diamond and one a MiaDonna Diamond Hybrid®. Can you tell the difference?

Compare MiaDonna Diamond Hybrid®

View our easy to read charts comparing MiaDonna Diamond Hybrids® to
Cubic Zirconia, Moissanite, and Earth Mined Diamonds by clicking on the boxes below

 

The MiaDonna Diamond Hybrid® vs. Cubic Zirconia

Cubic zirconia (CZ) has been the most popular diamond alternative for years. Before the advent of superior and more durable man made diamond coatings and cultured diamonds, cubic zirconia was the most common consumer choice for a more affordable diamond alternative.

MiaDonna & Co. has taken man made diamond alternative technology to a whole new level. Our Diamond Hybrid® consist of a non precious core that is infused with an enhanced form of man made diamond giving our hybrid stone a hardness nearly two times greater than CZ, a brilliance and light play that is undecipherable from a natural diamond and a non stick, non pores surface that repels dirt and grim superbly. The end result is a diamond simulant that is far more brilliant, durable and diamond like than cubic zirconia could ever be.

Properties

MiaDonna Diamond Hybrid®

Cubic Zirconia

Summary

Color

Averaging D to F

Colorless

D Colorless shows yellows and greens under UV light

Our Diamond Hybrids® throw the same color patterns as very fine earth mined diamonds, both under short and long wave UV lights, indoors and outdoors.

Cut

Ideal hearts and arrows cut by hand

CZ

Varies on cost

Our Diamond Hybrids® grade excellent to very good on the AGS cutting scale and are cut just like earth mined diamonds by hand. CZ’s cut is determined on how a company is going to sell it.

Index of Refraction

Analysis shows excellent averaging 2.24


Avg, 2.15

Gives off a glassy appearance

Analysis shows our Diamond Hybrid® averages a refractive index nearly identical to a natural diamond giving our hybrid stones an incredibly realistic brilliance that is incomparable to any other simulant being produced in the diamond alternative industry.

Percentage of SP3 Carbon Diamond Bonds

85% in its infused outer layer

0%

Our hybrid stone contains 85% SP3 carbon diamond bonds in its infused outer layer. These are the same bonds that make up real diamonds.

Clarity

IF to VS2

IF

Our Diamond Hybrids® are individually graded by the GIA certified Global Gemological Lab and come back averaging a VVS1 to VS2 in clarity. The natural feathering that occurs in the applied diamond layer is allowed to remain in order to give the hybrid stone a more desirable, realistic, natural diamond like appearance.

MOHS Hardness Scale

Overall hardness 9.1 / Outer layer 9.6


8.0 to 8.5

While the infused man made diamond layer by itself has a hardness of 9.6 once infused with the core the overall hardness of the entire stone is 9.1. This means are hybrid stone is as hard or even slightly harder than a natural Ruby, Sapphire or Emerald.

Cuts Glass

Yes

Yes

Glass has a hardness of 5.5 on the MOHS scale. CZ is 8.5 and cuts glass. Cutting glass is not a good qualifier to identify quality products.

Polish/

Symmetry

By diamond powder. Excellent

By diamond powder. Varies

The MiaDonna Diamond Hybrid® has perfect symmetry and polish.

 

The MiaDonna Diamond Hybrid® vs. Moissanite

Moissanite made its way onto the jewelry scene as a man made diamond alternative in the late 1990’s. Synthetic Moissanite has some similarities to natural diamonds and is very hard on the Mohs Scale but has always been considered inferior with its I grade color and doubly refractive index. Moissanite failed to surpass its predecessor, cubic zirconia, in popularity before other superior man made diamond technologies entered the market.

MiaDonna & Co. has taken man made diamond alternative technology to a whole new level. Our Diamond Hybrid® consist of a non precious core that is infused with an enhanced form of man made diamond giving our hybrid stone superb hardness, a brilliance and light play that is undecipherable from a natural diamond and a non stick, non pores surface that repels dirt and grim superbly. The end result is a diamond simulant that is far more brilliant, affordable and realistically diamond like than Moissanite could ever be.

Properties

MiaDonna Diamond Hybrid®


Moissanite

Summary

Color


D to F

Colorless

I to J

Tinges of yellows, grays and greens

Our Diamond Hybrid® is far superior to Moissanite in color and it holds it superiority in larger carats as well as smaller carats. The larger you go with Moissanite the greener its going to get.

Cut


Ideal hearts and arrows cut by hand

Cut to correct its doubly- refractive index.

Our Diamond Hybrids® grade excellent to very good on the AGS cutting scale and are cut just like earth mined diamonds by hand. Moissanite needs to be cut differently than a natural diamond in an attempt to correct some of its blurred or duplicated appearance.

Index of Refraction


Analysis shows excellent averaging 2.24

Avg, 2.67

Analysis shows our Diamond Hybrid® averages a refractive index nearly identical to a natural diamond giving our hybrid stones an incredibly realistic brilliance. Moissanite is significantly shinier when viewed next to a fine earth mined diamond giving it a unnatural appearance.

Internal Crystal Structure


Face-Centered-Cubic/Singly refractive.
Same as a diamond.


Hexagonal/Doubly refractive

The Diamond Hybrid® stones crystal structure is identical to an earth mined diamond which gives it the same light play as a natural diamond. Moissanites hexagonal structure creates bi-refringence a problem that splits light within the crystal giving it its doubly refractive blurry or fuzzy appearance.

Clarity


Internally Flawless to VS2

VS1 to VS2


Our Diamond Hybrids® are individually graded by the GIA certified Global Gemological Lab and come back averaging a VVS1 to VS2 in clarity. The natural feathering that occurs in the applied diamond layer is allowed to remain in order to give the hybrid stone a more desirable, realistic, natural diamond like appearance.

Percentage of SP3 Carbon Diamond Bonds


85% in its infused outer layer

0%


Our Diamond Hybrids® contain 85% SP3 carbon diamond bonds in the infused outer layer when tested under Raman analysis. SP3 bonds are the same bonds that make up real diamonds. Moissanite is made from silicon carbide and contains no SP3 bonds.

MOHS Hardness Scale


Overall hardness 9.1 / Outer layer 9.6

9.25

While the infused man made diamond layer by itself has a hardness of 9.6 once infused with the core the overall hardness of the entire stone is 9.1. This means are hybrid stone is as hard or even slightly harder than a natural Ruby, Sapphire or Emerald.

Cuts Glass


Yes

Yes

Glass has a hardness of 5.5 on the MOHS scale. CZ is 8.5 and cuts glass. Cutting glass is not a good qualifier to identify quality products.

Polish/

Symmetry


By diamond powder. Excellent

By diamond powder. Varies

MiaDonna Diamond Hybrids® have perfect symmetry and polish.

 

The MiaDonna Diamond Hybrid® vs. Earth Mined Diamonds

Earth mined diamonds are undoubtedly the most beloved gemstone of all time. The breathtaking beauty and rare physical qualities of the diamond have inspired substantial advancements in the science of simulant and synthetic gem technologies. These technologies paved the way for successors to fulfill the consumer demand for a superior man made diamond alternative that is not only more affordable, but can be produced under ethical, eco friendly conditions and be guaranteed conflict free.

Our Diamond Hybrid® consist of a non precious core that is infused with an enhanced form of man made diamond giving our hybrid stone increased hardness, a brilliance and light play that is undecipherable from a natural diamond and a non stick, non pores surface that repels dirt and grim just like a natural diamond. Our hybrid stone is more affordable, diamond like and natural looking than any other diamond alternative in the industry next to lab grown cultured diamonds which are also available at MiaDonna.com.

Properties

MiaDonna Diamond Hybrid®


Earth Mined Diamonds

Summary

Color

D to F

Colorless

Average in today’s market is H to J

D to F colors are very rare in earth mined diamonds and would be near $10,000.00 per carat which makes our Diamond Hybrid® incredibly affordable at only 3% to 5% the cost of a natural diamond when comparing like colored stones.

Cut

Ideal Hearts and Arrows cut by hand

Varies on cost

Our Diamond Hybrids® grade excellent to very good on the AGS cutting scale and are cut just like earth mined diamonds by hand. In fact only 1 in every 1,000 natural diamonds that go to market will every get to the same level of cut as every single hybrid stone.

Index of Refraction

Analysis shows excellent averaging 2.24

2.42

Analysis shows our Diamond Hybrid® averages a refractive index nearly identical to a natural diamond giving our hybrid stones an incredibly realistic, natural diamond like brilliance.

Internal Crystal Structure

Face-Centered-Cubic/Singly refractive

Face-Centered-Cubic/Singly refractive

Our Diamond Hybrid® has the identical crystal structure as a mined diamond. Both the hybrid and a natural diamond handle light in the same way, singly refractive, which is why the hybrid posses such a natural, realistic appearance..

Clarity

Internally Flawless to VS2

Varies- nearly always a birth mark

Our Diamond Hybrids® are individually graded by the GIA certified Global Gemological Lab and come back averaging a VVS1 to VS2 in clarity. The natural feathering that occurs in the applied diamond layer is allowed to remain in order to give the hybrid stone a more desirable, realistic, natural diamond like appearance.

MOHS Hardness Scale

Overall hardness 9.1 / 9.6 outer layer


10

While the infused man made diamond layer by itself has a hardness of 9.6 once infused with the core the overall hardness of the entire stone is 9.1. This means are hybrid stone is as hard or even slightly harder than a natural Ruby, Sapphire or Emerald. Only our lab grown man made diamonds achieve the same hardness as a natural diamonds 10.

Percentage of SP3 Diamond Carbon Bonds

85% outer layer

100% Solid

The Diamond Hybrid® contains 85% of SP3 diamond carbon bonds in its infused outer lay as verified by Raman analysis. Only natural diamonds and our man made grown diamonds are 100% solid diamond bonds.

Cuts Glass

Yes

Yes

Glass has a hardness of 5.5 on the MOHS scale. CZ is 8.5 and cuts glass. Cutting glass is not a good qualifier to identify quality products.

Polish/

Symmetry

By diamond powder. Excellent

By diamond powder. Varies

MiaDonna Diamond Hybrids® have perfect symmetry and polish.