The safest way to clean most lab-grown diamond and fine jewelry at home is with warm water, a drop of mild dish soap, and a soft brush. Fill a small bowl with warm (not hot) water and a bit of gentle soap, then soak your jewelry for 10–15 minutes. Using a soft-bristle toothbrush, gently brush around the stone, beneath the setting, and along the band to loosen any buildup. Rinse under clean, lukewarm water and dry with a soft, lint-free cloth.
Avoid scrubbing too hard—especially around pavé, halo, or intricate details. Gentle, regular cleaning is far better than an occasional heavy scrub.
Everyday wear means regular contact with lotions, soap, skincare products, and natural oils from your skin—all of which can gradually dull your jewelry’s sparkle. For pieces you wear daily, like an engagement ring or wedding band, we recommend a quick at-home cleaning once a week using the warm water and mild soap method.
For special-occasion pieces or jewelry you wear less often, a gentle clean every few wears is usually enough. If your ring starts to look cloudy, feels sticky, or still lacks sparkle after cleaning, it may be time to have a jeweler take a closer look.
Different styles of jewelry collect buildup in different places, so a little extra attention can make a big difference:
Engagement rings & bridal sets: Focus on the area beneath the center stone and around the prongs, where soap and lotions often collect. Use gentle, small circular motions with a soft brush.
Wedding bands & stacking rings: Clean each ring individually so you can reach every side and avoid trapping residue between stacked bands.
Earrings: For studs or hoops, soak and gently brush the front, back, and posts, then dry thoroughly before wearing again.
Necklaces & bracelets: Lay pieces flat while cleaning and drying to prevent tangles. Pay special attention to the clasp area, where buildup is common.
If you’re unsure about how to clean a specific piece—especially one with delicate details or mixed materials—it’s best to have a jeweler confirm the safest method.
Most precious metals—like platinum and gold—respond well to the same gentle soap-and-water method, though certain settings may need extra care:
Platinum & gold bands: Clean with warm water and mild soap only. Avoid abrasive pastes or rough cloths that can gradually scratch the metal.
Pavé, halo, and detailed settings: These designs feature many small stones and tiny spaces where residue can collect. Use a very soft brush and light pressure to avoid loosening stones. If your setting has taken a hard knock or you notice any movement, have a jeweler inspect it before cleaning.
Mixed metals or intricate designs: Stick to the gentlest method—warm water and mild soap—and avoid household cleaners that could damage the metal or delicate setting details.
When in doubt, a jeweler can help confirm whether at-home cleaning is appropriate for your specific piece.
Some common household cleaners and DIY “hacks” can damage jewelry over time. To keep your pieces looking their best, avoid:
Harsh chemicals: Bleach, chlorine, acetone, and other strong cleaners can weaken metal and damage finishes.
Abrasive powders and pastes: Baking soda, toothpaste, and gritty scrubs can scratch metal and certain gemstones.
Boiling water or extreme heat: Sudden temperature changes can stress settings and some stones.
Unverified ultrasonic cleaners: Ultrasonic machines can work well for some pieces, but they aren’t safe for every setting or gemstone. Always confirm with a jeweler before using one.
When in doubt, stick with the gentle soap-and-water method—or check with a jeweler first.
Even with regular at-home care, professional cleanings and inspections are important for keeping your jewelry in its best condition. A jeweler can:
As a general guideline, have your engagement ring and wedding band inspected every 6–12 months, especially if you wear them daily.
If you ever have questions about caring for your MiaDonna jewelry, notice a change in how your piece looks, or suspect a setting may be loose, please reach out through our Customer Care and Support page. A member of our team will be happy to review your concerns and help determine whether at-home cleaning or an in-person inspection is the best next step.
Mix warm water with a drop of mild dish soap, soak your ring for 10–15 minutes, then gently brush with a soft toothbrush—especially under the setting. Rinse with clean, lukewarm water and dry with a soft, lint-free cloth.
No. Harsh chemicals and abrasive products like toothpaste or baking soda can damage metal and certain gemstones. Stick to warm water, mild soap, and a soft brush.
Have a jeweler inspect your engagement ring and wedding band every 6–12 months, or any time you notice a loose stone, visible damage, or a sudden change in how your jewelry looks. If you’re unsure, you can always start by contacting us through our Contact Us page for guidance.
For rings you wear every day, a quick at-home clean once a week helps prevent buildup from lotions, soap, and natural oils. If your ring still looks dull after cleaning, consider having a jeweler take a closer look.
It’s best to remove your jewelry before swimming, exercising, cleaning, or doing any activity where it could be exposed to chlorine, impact, or harsh products. This helps protect both the setting and the metal over time.
